Interwoven Water Wall

Previous
Interwoven water wall

Reflective mirror-polished stainless steel and rusty oxidised (mild) steel are combined to create an interwoven, textural pattern.

Detail of pattern of reflective stainless steel and rusty mild steel on Interwoven water wall

The Interwoven Water Wall combines mild steel and mirror-polished stainless steel.

Whilst it is possible to make our walls freestanding, allowing water to flow down the front and back faces, it is preferable to have a wall against which the water wall be supported, hung or braced.

Installation and delivery are included in the price for UK commissions, and for overseas shipping quotes can be obtained and charged at cost.

If installed correctly with a suitable filtration and softening package, then maintenance required is minimal. Typically, this would consist of draining the piece a few times a year, removal of any debris and refilling with fresh water. In areas of hard water or high salt content, the tank will need to be drained down more frequently as the concentration of salts in the water increases over time. Cleaning the polished stainless steel should be undertaken using a soft, lint free cloth only, taking care to ensure that no grit is on the cloth that may cause scratching. Maintenance instructions will be issued on installation.

DOWNLOAD BROCHURE



We do not share or sell on your personal information.

We respect your privacy