Steel Breeze

Referencing a snapshot of emotion, as in Pink Floyd’s ‘Shine on You Crazy Diamond’, the sculpture’s design is abstract and organic, resembling a series of delicate, interwoven ribbons or leaves caught in mid-motion.

Variations & finishes

1. Stainless Steel

Mirror-polished stainless steel

2. Copper

Antique tan copper

Steel Breeze comes in three sizes, with larger sizes available on request. They are lit with a warm white LED.

Available standard size

Steel Breeze comes in 59 inches, 71 inches, 79 inches. Other sizes available on request.

Available finishes

Stainless Steel and Bronze

Model Scale

59 inches, 71 inches, 79 inches
(Model scale: 71 inches)

Design details

Steel Breeze converses with its setting, enhancing it. Light dances across its surface while its mesmerizing perforated pattern draws us into a multilayered realm.

“I appreciate everything that everyone did, and look forward to visiting with you in the future. Please let the people who did the hands-on execution of these two beautiful pieces know how appreciative I am of their efforts. Thanks to all.”

Dave Collins Landscapes, USA

Created from mirror-polished stainless steel, two circular discs are positioned parallel to each other and laser cut in an elaborate pattern to reveal the gap between them. The piece is encircled by an elegant band of antique tan patinated bronze.

Product information

David Harber provides a steel tube which is cast into the ground by the client at the desired location and secured with a concrete foundation. Steel Breeze is then fixed onto the tube once the concrete has been cured. The size of the foundation tube is dependent on the size of Steel Breeze chosen.

It is possible to incorporate a low voltage LED uplighter in the bottom of sculpture for night-time interest. We supply the driver, but this will require a conduit plus drawcord to be installed for the electricity supply.

Shipping quotes can be obtained and charged at cost.

We would recommend Steel Breeze be cleaned when necessary with warm water and a very soft cloth and then rinsed with warm clean water. Once dry, it can be polished with glass cleaner and a soft lint-free cloth. Use of any abrasive cleaner will damage the finish and must be avoided. Maintenance instructions will be issued on installation.