Interwoven Water Wall

The Interwoven Water Wall creates the illusion of an infinitely flowing tapestry, intertwining strands of stainless and oxidised steel under a flowing waterfall to lend a powerful yet calming presence.

Variations & finishes

Stainless Steel and Mild Steel

Mirror-polished stainless steel and rusty oxidised steel

The Interwoven Water Wall comes in two sizes, and is available in larger sizes upon request. The design is supplied with warm white LED uplighters.

Available standard size

This piece comes in at 190 x 90cm and 240 x 115cm, and larger sizes upon request.

Available finishes

Stainless Steel and Mild Steel, Stainless Steel and Bronze

Design details

The bright colours of the surroundings are highlighted in the reflective stainless steel, beautifully complementing the earthy tones of the rusty oxidised steel.

The illusion of a woven tapestry of the materials and colours creates a stunning effect, emphasised by the shimmering water running over the piece.

Product information

Whilst it is possible to make our walls freestanding, allowing water to flow down the front and back faces, it is preferable to have a wall against which the water wall be supported, hung or braced.

Installation and delivery are included in the price for UK commissions, and for overseas shipping quotes can be obtained and charged at cost.

If installed correctly with a suitable filtration and softening package, then maintenance required is relatively simple. Typically, this would consist of draining the piece a few times a year, removal of any debris and refilling with fresh water. In areas of hard water or high salt content, the tank will need to be drained down more frequently as the concentration of salts in the water increases over time. Cleaning the polished stainless steel should be undertaken using a soft, lint free cloth only, taking care to ensure that no grit is on the cloth that may cause scratching. Maintenance instructions will be issued on installation.